|
Product Details:
Payment & Shipping Terms:
|
Item Name: | Conical Wire Brush | OD: | 115mm |
---|---|---|---|
Nut Size: | M14*2.0 | Wire Material: | Carbon Steel |
Wire Dia: | 0.3mm | Wire Length: | 30 Mm |
Max R.P.M: | 12500 | Cup Color: | Red |
Highlight: | wire wheel cup brush,stainless steel cup brush |
High Tensile Crimped Steel Conical Wire Brush 115MM For Welding Seams
Product Description
1. Perfect for removing paint / rust etc., deburring and edge blending.
2. Twisted bristles enables the brushes to be strong and tough.
3. Ideal solution for weld cleaning, preparing rough surfaces, and fast removal of paint, scale and rust
4. Nut size :you could choose M10X1.25, M10X1.5 ,M14X2 ,M16X2, 5/8''-11 UNC
Steel Wire Bevel Brush
Outer diameter | 115mm |
---|---|
Nut size | M14*2.0 |
Wire material & Wire Dia. | 0.5mm carbon steel wire |
PRODUCT FINDER WELD SEAM CLEANING
Impurities or non-metallic inclusions can occur on the surface of the weld, depending on the welding procedure. Non-metallic inclusions do not adhere to the surface to the extent of the other materials in the weld. If a coating is later applied to the welded part, faults in the coating and corrosion can occur in the area of the inclusions.
Important safety instructions
For efficient and safe use, always choose the maximum possible brush diameter that can be fitted to the grinder.
As mentioned in the section on operating speeds, the brush diameter defines the peripheral speed.
It can also affect brush performance.
Installation instructions
Please read before fitting the brush.
• The speed of the drive shaft on your machine should not exceed the maximum safe speed of the brush.
• The length of the shaft should be sufficient to ensure a firm fit in the chuck.
• Brushes with a clamping shank can be installed without problems in standard drill chucks or collets.
• The connecting threads on the brushes have flats for simple installation and removal.
PRODUCT FINDER WELD SEAM CLEANING
Impurities or non-metallic inclusions can occur on the surface of the weld, depending on the welding procedure. Non-metallic inclusions do not adhere to the surface to the extent of the other materials in the weld. If a coating is later applied to the welded part, faults in the coating and corrosion can occur in the area of the inclusions.
Important safety instructions
For efficient and safe use, always choose the maximum possible brush diameter that can be fitted to the grinder.
As mentioned in the section on operating speeds, the brush diameter defines the peripheral speed.
It can also affect brush performance.
Installation instructions
Please read before fitting the brush.
• The speed of the drive shaft on your machine should not exceed the maximum safe speed of the brush.
• The length of the shaft should be sufficient to ensure a firm fit in the chuck.
• Brushes with a clamping shank can be installed without problems in standard drill chucks or collets.
• The connecting threads on the brushes have flats for simple installation and removal.