Narrow brushing face 3 Inch Diameter Crimped Stainless Steel Wire Wheel Brush

Narrow brushing face 3 Inch Diameter Crimped Stainless Steel Wire Wheel Brush for Derusting

Narrow brushing face which allows wire tips access to slots that are to be brushed,normally inaccessible to a wider brush. Flexible brushing action. Can be used singularly or stacked in multiples. Solid ring construction. 

Details Product Description

The Stainless Steel Wire Wheel Brush mounts on hand-held drills to strip and remove paint, rust, and coatings with high-speed chiseling action that cleans the substrate in one step. The Hexagon Hole allows the unit to run in reverse and eliminates slippage. Operating the wire brush generates minimal heat and low pressure, which helps avoid smearing and distortion to the workpiece. The flexible metal strands in the brush are secured to protect against wire splinters and edge tearing. The wire brush is self-sharpening.

It can provide aggressive free-cutting action for stripping, cleaning, and light burr removal on wood, plastic, masonry, fiberglass, and metal. The standard fastening type is an arbor hole in the center of the brush or wheel.

Advantages

1. Crimped Wire Stainless Steel Wire Wheel Brush offer great flexibility on uneven surfaces.

2. Models are available for deburring, edge blending, roughening for adhesion, removing flash, finishing, and surface prep.

3. Some models may also be used for cleaning rust, scale, dirt, and paint.

4. Used with power tools and machines (available separately).

Recommendations for use

Please observe the recommended rotational speeds.

For the best results, use a tool drive with a minimum output of 500 watts.

Safety notes

When clamping the brush, ensure that the shank is clamped as far into the arbor as possible.

This applies in particular for use in the high rotational speed range. 

Materials that can be worked

Cast iron
Steel, cast steel
Applications
Cleaning
Deburring
Derusting
Descaling
Paint stripping
Removing oxide layers
Root seam processing
Work on fillet welds
Work on weld seams