Deburring Black Color Cup Body 4 Inch Nylon Cup Brushes for Light Stock Removal

• 75mm, 100 mm , 125 mm 150 mm  and so on
• Special design helps prevent clogging and loading
• Will not react with metal because made of non-oxidizing materials
• Safer than conventional wire brushes because made of non-sparking material
• Under normal circumstances lasts up to 6 times longer than conventional wire brushes
• Unit has standard 5/8" thread
• Maximum 6500 rpm
• 

• cup brushes can be used on all metals, wood, tile, plastic, PVC, stone and more. They excel at removing rust, stripping paint, removing glue, sealant, mill scale, oxidation, excess grout, and prepping truck beds for bed liner.

• Nylon wire cup brushes like BHA’s will conform to the work piece as opposed to getting snagged on protrusions so they can be used on uneven surfaces including those with nuts, bolts, brackets, or rivets without catching edges. The bristles are flexible allowing for them flex around imperfections.

• The 4 inch Nylon Cup Brush is capable of moderate to light stock removal depending on the grit selected.

• Nylon cup brush consists of heat resistant, nylon bristles, impregnated with abrasive grains.

• As the wire brush is used and the nylon wears away the filaments reveal new sharp abrasives creating a longer more consistent useable life when compared to metal wire brush alternatives. These cup brushes come standard with a 5/8”-11 arbor hole make them compatible with most variable speed angle grinders, polishers and buffers.

  These cup brushes can be used wet or dry, are non-sparking, and remain cooler than metal wire brushes during use which protects not only the work pieces but the brush itself.

• Our factory offers the 4 inch nylon cup brush in 3 grits:

• Gray – Coarse (80 grit) for higher stock removal such as removing rust from iron.

• Red – Medium (120 Grit) for more moderate stock removal such cleaning and prepping surfaces for sprayable truck bed liner coatings.

• Blue – Fine (240 Grit) for light cleaning and blending such as removing paint from finished woods or work on fiberglass.

2, Original Du-Pont material

Abrasive grit encapsulated into the extruded nylon filament allows an abrasive nylon brush to perform deburring, edge blending, and surface finishing. Abrasive brushes in power brush or wide face cylinder brush format deliver the flexibility and conformability of a brush, while also imparting the benefits of an abrasive: selection of grit sizes to control finish, and functionality for deburring, cleaning, surface finishing, and edge blending. Abrasive Nylon is suitable for use on a broad range of materials.